How to Clean Heat Press Machine

Heat press machines often get greased up and need a good cleaning. Most of us are lazy to take the necessary precautions to avoid this. All of us have been guilty of not using any heat press sheet on our heat press machines.

This leaves a heavy accumulation of grease onto the upper heat platen. However, don’t worry or get grossed out. You can easily clean off that grease and have your machine close to new.

Non-Stick Coated Heat Press Machine

Firstly, you need to check if your machine has non-stick coating or not. In case it does, you should cherish as the cleaning process is quite simple. Just heat the pan a bit and then rub the grease off. You’ll need to rub quite vigorously if the grease has accumulated over quite some time. Scrub it off with a rag hardly and you’ll be good to go. Remember to take the necessary safety precautions and wear a heat proof protected glove.

Non-coated Heat Press Machine

If your heat press machine isn’t coated then you’ll need to put it in a little more effort into cleaning it properly. A light sandpaper can do the job if the grease isn’t too old. Simply buy sandpaper form your nearest store and use it to effectively clean your heat press machine.

You may also have to use a cleaner designed specifically for the job. These cleaners are used in the industry especially in automotive industry by car mechanics. The cleaner basically has light pumice sand in it and is used for heavy duty degreasing. Although you’ll need to spend some extra bucks however you can be confident about the result. There are other degreasers available in the market as well so you have a lot of options.

Precautionary Measures

Whenever you want to degrease your heat press machine, it’s important to take some precautionary measures to ensure safety. Firstly, always unplug the machine before degreasing. Don’t have any kids or pets around while you are cleaning as the cleaners have harmful chemicals in them. Using a glove is recommended as it will safeguard you from any spilling. For Teflon-coated platen, don’t use cleaners that have grit. They tend to leave marks onto the machine and will decrease its value.

For people that don’t want to end up cleaning their machines should adopt certain measure during pressing. Deploy a reusable cover sheet onto your clothes before application. A few companies offer pad protectors for the platen which doesn’t allow it to get greasy quickly. It will also help the garments get on and off onto the platen easily.

The most important step is to buy a high quality heat press machine that caters to all of these troubles. There are multiple top heat press machines available in the market at competitive prices. You can purchase one without creating a dent onto your pocket and save yourself from all of these troubles. In case you don’t want to buy a new machine, simply follow up on above mentioned steps.

Reply